No products in the cart.
— OR —
Our 3D Printing Bed Adhesive for Polypropylene Filaments is designed to work with polyolefin filaments including Essentium PP-CF. This adhesive is designed to ensure prints stick firmly when the print-bed is hot and that the part is easy to remove once cooled. Essentium PP bed adhesive is designed to work in conjunction with our polypropylene build sheets to act as a release layer to prevent parts from permanently adhering to the PP build sheet, yet still have a strong enough bond to keep the parts on the bed during the print.
Since bed adhesion is critical to the success of the high-speed extrusion process, we wanted to provide our customers a reliable adhesion solution that would give them confidence in their prints. We worked together with Magigoo, the go-to 3D printing bed adhesive solution, to test and tailor these products to work with Essentium’s Materials Portfolio and HSE 3D Printer. With the Essentium 3D Printing Bed Adhesive – Powered by Magigoo, customers no longer have to worry about print failures due to poor bed adhesion. Not only will the first layer of a 3D print stick every time, but the finished 3D prints will come off the 3D printer bed effortlessly.
These products are for professional use. Please read the instructions carefully before use.
Using this product with other than designated type filaments might cause over adhesion and damage your build surface.
Some products may have corrosive and eye irritation substances. Wash your hands after use. Ideally use rubber gloves. Read Safety Data Sheets or consult with manufacturer if necessary.
The bottle applicator has a spring valve inside. In order to activate it, press the nib against the build plate firmly. When pressing bottle sides, make sure the applicator is not going to pop out.