november, 2020

18nov8:34 pm8:34 pmWebinar: Jigs and Fixtures Utilization and Design for Additive Manufacturing

Event Details

Today’s modern manufacturing and industries require a variety of supplementary and primary alignment and holding apparatus. The ability to quickly and efficiently modify and prototype jigs and fixtures has become increasingly important to remain competitive and innovative. This webinar will review typical jigs and fixtures used in a variety of industries. We will review how one should select material per application with consideration to cost, speed, strength, and other properties.

There will also be discussion on how to efficiently design these parts utilizing the HSE (High Speed Extrusion) printing platform. These design discussions will cover how to get the most strength out of certain geometries as well as how to produce a suitable part as quickly as possible. For material selection, we will cover an overview of the variety of printable materials, including PPSCF, HTN, PACF, HTNCF, PEEK, and Ultem. There will be a cursory discussion to cover each of the materials’ strengths and weaknesses regarding different applications.

This webinar will start from CAD part conception to the import of the jig .stl in slicing software to finalized files ready to print. It intends to fully inform on the best-known practices we currently have regarding successful and usable print outcomes. At the end of this webinar, you will have tools to make extrusion printing work to your advantage and achieve quality jig and fixture results with the minimum amount of revisions.

DATE: Wednesday, November 4, 2020

TIME: 10 a.m. CST – 11 a.m. CST

PRESENTER: Applications Engineer, Will Blalack

Register for the webinar.



(Wednesday) 8:34 pm - 8:34 pm